Why should you stipple a Glock?
As a matter of fact, this action gives gun owners a more secure grip and a sense of ultimate safety. In slippery conditions like wet weather or getting sweaty hands, this modification is truly a big plus. It provides a firmer grip for you to have the most precise and complete control over a Glock.
In addition to its functions, your job can improve the look of your gun by attractive stippling, as long as it’s done correctly. Otherwise, your Glock could end up being a disaster and lowering its resale value.
You could hire professional route or a gunsmith to do it for you, but custom stipple jobs are quite expensive. This guide lay out the basics of how to stipple a Glock yourself on the cheap.
What is stippling?
Stippling is a modification technique that uses small dots, ridges and other such formations to increase the friction and make the surface easier to grip.
For some folks, the major reason why they undertake a do-it-yourself project is not savings. Doing a project by yourself might take skill regarding modifications will have improved. Not just knowing how to use a gun, you can do any modifications up to your whims.
How to stipple a Glock?
- Soldering iron: A cheap soldering iron will do everything you need.
- Dremel tool: An option if you want to remove some of the finger grooves.
- Sandpaper: 2 sheaves of sandpapers.
Stipple job literally is a simple process. Follow the step by step instructions below to do it yourself stippling of a Glock.
1: Check the pistol
Before stippling your pistol, ensure that the pistol is properly unloaded. Press the magazine release to remove it off and get the slide off. Please be careful while perform this first step. Otherwise, they may hurt you a bit.
Decide which parts you want to stipple on your Glock: the backstrap, both sides or the entire grip. For more effect to function, I recommend the grip. The reason for this suggestion is that it's an easily modified area and also helps enhance the textures.
2: Smooth out the grip bumps
Use the Dremel tool to smooth out the natural bumps of the grip. By doing that, the edges and the frame will have a smooth consistent surface. Setting the tool at a low speed, all of what you do is just turn it on and let it go all around the grins.
Smooth out the worked areas by using sandpapers. Mark off the area to stipple by drawing lines to have nice straight edges and keep you stay within the lines. If it’s your very first stipple job, a standard pointed tip is the safest choice for not ruining your Glock. You can try a variety of tips and patterns, make sure that it’s done correctly by using a pencil to lay out patterns on the grip’s surface.
3: Heat the soldering iron
Let the soldering iron heat up for a while. This adjustable heat tool allows you to work on different polymers and have a proper heat for the best project. Adjust the heat to the proper setting by practicing on some scrap polymer before you go to work on your Glock.
This is the most important step in the whole stippling process. Be patience and stay focused! The first thing you do in this process is creating the outline of the stippled area by following pencil lines, then filling the shapes until the entire surface covered with dimples.
So, just touch the soldering iron lightly and lift up. For those who want their Glock to look more aggressive, just need to press down harder. Instead of lifting the tool straight up, you move to the next hole quickly. Set aside to cool down for a bit, then sanding the rough edges until the project comes out smooth.
By doing that, it will not catch your clothing or rub against your skin. For this reason, it can be the most difficult step on how to stipple a Glock. Once you can carry your Glock without any snags and discomfort. Then your stipple job is done!
Don’t put too much pressure on the tip of the soldering iron or the plastic will melt and stick to the tip. Never forget that you are working with polymer, it can melt immediately. The harder you press, the deeper the dots and lines will be.
In a nutshell, stippling is an effective way to create better gun handling utility. How to stipple a Glock sounds like a ton of work and probably take a lot of time, even half of your day but the end result will worth your time. With this straightforward guidance, you will find that it’s actually easy and quick.
Whenever you know how to modify a polymer frame yourself, you can do anything to make your Glock be functional and meet your needs. If you have any questions, requests or comments, please feel free to enter in the field below!